Are the tent walls made in the USA?

Yes. Every wall is printed, sewn and finished in our Houston, Texas facility — made in the USA — and ships nationwide.

Will the walls fit my existing tent?

They are sized for standard 10-ft hex frames. Send your leg-to-leg measurement and leg height and we will confirm before printing.

Are the walls printed on both sides?

They are printed edge-to-edge on the outside with a clean white reverse. Double-sided walls are available on request — ask for a quote.

Can I use walls in the wind?

Yes, with adequate ballast (40 lb per leg). In strong gusts remove side walls first, since they turn the tent into a sail.

How do the walls attach?

Full walls: hook-and-loop along the top and zippers down each leg. Half walls: leg attachment at counter height with a gravity hem bar to keep them taut.

What is the turnaround?

2 business days standard, 1 business day rush, plus 1–3 days ground shipping nationwide.

Tent Walls for 10-ft Event Tents — Full Wall vs. Half Wall, and When You Need Each

A canopy gets you noticed. Walls get you remembered.

The canopy is what people see from across the fairground. The walls are what they see when they arrive: the backdrop behind your table, the surface behind every selfie, the panel that blocks the competitor's tent behind you. Printed walls roughly triple the branded area of a 10×10 tent for a fraction of the tent's price — and because they zip and Velcro onto standard hex frames, they can be added to a tent you already own. We print two formats for 10-ft frames: a full-height wall and a half-height wall.

Order a 10-ft Tent Full Wall →

Order a 10-ft Tent Half Wall →

Full wall — the branded backdrop

Roughly 10 ft wide × 7 ft tall, edge-to-edge dye-sublimated graphic with a white reverse so it looks clean from inside the tent.
Attaches with a hook-and-loop strip along the top valance and zippers down each leg — a one-minute swap that needs no tools.
Blocks wind and low sun completely on that side, hides the tent behind you, and gives staff a private storage zone.
Best used as the back wall. Add a second and third full wall for a three-sided room on exposed sites or where you store stock.
Design at eye level: put the logo and one message 4–6 ft from the ground where cameras and customers look.

Half wall — the open, walk-up booth

Roughly 10 ft wide × 3.5 ft tall, printed full colour with a white reverse.
Hangs from the leg at counter height with a gravity hem bar that keeps it taut in light wind.
Keeps sightlines open on the sides so passers-by can see in and staff can chat across the rail — ideal for sampling, sign-ups and retail.
Turns a plain leg into a branded counter front; pairs with a table behind it for a 'shop front' look.
Lets breeze through on hot days where a full side wall would turn the tent into an oven.

Which combination should you buy?

Farmers market or festival vendor: full back wall + two half side walls. Branded backdrop, open sides, breeze.
Trade show or expo: full back wall only (aisles are indoors, and neighbours are close).
Registration, sampling or check-in: full back wall + one half wall as a counter front.
Windy, coastal or sunny sites: full back wall + two full side walls; drop the canopy a notch.
Sponsor or team tent at a sports event: full back wall so the logo is behind every athlete photo.

Designing a back wall that photographs well

One logo, one message, one call to action. A wall is not a brochure.
Repeat a small logo pattern across the lower third (step-and-repeat) so it appears in every photo no matter where people stand.
Avoid placing anything critical in the bottom 12 inches (tables, coolers and legs hide it) or the top 6 inches (the valance overlaps it).
Use saturated colours; the inside of a tent is shaded, and pastels go grey.
Supply CMYK PDF, AI, EPS, TIFF or PSD at 150 DPI full size on our wall template; every file is pre-flighted by a Kolt designer and proofed before printing.

Fit, care and storage

Walls are sized for standard 10-ft hex frames. Ordering for a frame we did not supply? Send the leg-to-leg measurement and leg height and we will confirm fit.
Machine-wash cold, hang dry. Fold loosely and store in the tent bag; creases drop out once hung.
In strong wind, remove side walls first — walls add load to the frame — and keep 40 lb of ballast per leg.

Turnaround and shipping

Walls ship in 2 business days from artwork approval (1-day rush available). Every wall is dye-sublimated and sewn in the USA at our Houston, Texas facility and ships nationwide via FedEx or UPS. Buying a new tent? Bundle walls on the 10×10 tent page — a full back wall or back-plus-two-sides can be added in the configurator.

Bundle walls with a new 10×10 tent →

Frequently asked questions

Are the tent walls made in the USA?: Yes. Every wall is printed, sewn and finished in our Houston, Texas facility — made in the USA — and ships nationwide.
Will the walls fit my existing tent?: They are sized for standard 10-ft hex frames. Send your leg-to-leg measurement and leg height and we will confirm before printing.
Are the walls printed on both sides?: They are printed edge-to-edge on the outside with a clean white reverse. Double-sided walls are available on request — ask for a quote.
Can I use walls in the wind?: Yes, with adequate ballast (40 lb per leg). In strong gusts remove side walls first, since they turn the tent into a sail.
How do the walls attach?: Full walls: hook-and-loop along the top and zippers down each leg. Half walls: leg attachment at counter height with a gravity hem bar to keep them taut.
What is the turnaround?: 2 business days standard, 1 business day rush, plus 1–3 days ground shipping nationwide.